Tuesday, July 20, 2010
From Custom Suspension packages to Braking and Power Packages we can create an ideal setup for you car! Whether your looking for mild upgrades to major upgrades we will tailor to your needs! We carry a wide selection of suspension parts from BC Racing to Perrin to Whiteline, from bushings to full coilover sets! With brands like Hawk, Stoptech, DBA and Project Mu we can make sure you stop when you want to stop! Want more power? Its easy to go stage 2 with all the options we have! From Fujitsubo to Greddy to SPT(Subaru Performance Tuning) choosing the exhaust is the hard part! Tuning is made easy with the Cobb Accessport, also reads live data, logs data, estimates Horsepower and Torque, even fuel economy!
Don't see what your looking for on the website? Just ask and we will do the best we can to get what you want!
Thursday, April 22, 2010
Tuesday, February 23, 2010
Click this link to be taken directly to Red Line fluids category.
Monday, February 8, 2010
Time to replace your clutch? We have you covered! The entire SPEC Clutch product line is on sale this week with FREE SHIPPING!
That's right, get your Stage 1-5 Kit for WRX/STi or LGT shipped to your door at no extra cost!
Click the banner above to jump over to www.SubaruWRXparts.com and view all the great clutch kits from SPEC Clutch!
Monday, February 1, 2010
Monday, January 25, 2010
Thursday, January 21, 2010
Monday, January 11, 2010
We've taken our popular 'Deal of the Day' and now expanded it into 'Deal of the Week'. This gives you 4 extra days to get your orders in!
This week we have all Hawk Brake Pads and DBA Rotors receiving free ground shipping in the 48 states!
This deal is automatically applied at check-out, contact us today with any questions!
Hours: M-F 7:30am to 5:30pm and Sat 7:30am-1pm
Friday, January 8, 2010
Thursday, January 7, 2010
APS ran out of stock on their popular 65mm and 70mm intakes as well as there Intercoolers systems. We've received a shipment in today after months of these parts being on back-order. All previous orders were filled and we now have a whole bunch more on the shelves to ship out. Don't miss out though because these parts are so popular there is no doubt that they'll end up on back-order again.
Contact us today to place your order!
Tuesday, January 5, 2010
GrimmSpeed Up-Pipe details:
Due to emission regulations, Subaru has put restrictive catalytic converters in the exhaust system. These restrictive catalytic converters do not allow for optimal exhaust flow to the turbo, thus top performance of the exhaust system cannot be achieved. Also, removal of the catalytic converter helps prevent the possibility of damaging the turbo if the catalytic converter breaks apart. GrimmSpeed’s Up-Pipe eliminates the restrictive catalytic converter and provides a larger diameter pipe that helps spool the turbo in a quick and efficient manner. There is a 10+ whp gain when using the Up-Pipe.
Adding a non-cat'd up pipe is one of the first things you should do to your Subaru. Arguably one of the best $/HP ratios. Another great feature of the GrimmSpeed up pipe is that the inlet is gasket matched so you have a perfectly smoothed out exhaust flow compared to the big step that that tiny stock inlet has.
The GrimmSpeed Up-Pipe is specifically created without an EGT bung. An EGT sensor is not necessary. If you would like to keep tabs on EGT temperatures the correct place to do it is on the exhaust manifold right after the exhaust ports, this is the only place where the correct temperatures can be taken.
The entire Up-Pipe is made of 304 SS and has a pipe-wall thickness of 2.0mm. The inlet size is 1.93" and the outlet size is 1.72". The pipe tapers down to 1.72” and acts as a funnel as it moves into the turbo allowing for the smoothest transition and best air-flow quality. The flex joint is not located in the bend, which adds to the life expectancy of the flex section. GrimmSpeeds outlet size is a perfect match to the most common stock location turbos allowing for a smooth transition into the turbo.
- Flow through Flex - There are no big steps in the flow path of GrimmSpeeds flex joint. GrimmSpeeds flex is not located on a bend so there is very minimal flow loss(if any) through the flex.
- 2.0mm Piping Thickness - almost all pipes on the market use a 1.5mm thick piping wall, not GrimmSpeeds. They use a 2mm thick piping wall(33% thicker than all of our competition!)
- Pipe to Flange Connection - Much smoother connection. Piping is ported flush with flange so there is no step into the pipe.
- 1.92" Inlet = perfect match to gasket allowing a little room for gasket movement(anything bigger, ie 2", will almost be guaranteed to put the gasket in the flow which is horrible for flow)
- 1.75" Outlet = Narrowing down from 1.92 to 1.75 acts as a funnel. Also very close match to most common turbos so you have much less step going into the turbo(unlike a straight through 2" which creates a huge step going into most common turbos vf's, tdo4s, etc)
- Massiave 304SS flanges
- 10+whp gain
- Minimal internal steps for maximum flow
- Complete stainless steel construction(pipe, flex section, flanges)
- Optional ceramic coating
- Weight reduction over stock piece
- Flex joint that is NOT located in the bend which adds life expectancy to the flex section. many other up pipes have a flex right in a sharp bend so all the exhaust/turbulence is hitting up against it.
- Reduce turbo lag
- Increase exhaust flow to turbo